Oil Pad OS by OscillatorSynk
Oscillator 1 timbre
Only square oscillators are enabled, resulting in a narrow sounding tone.
Pulse width of square oscillator is set to 83% (50% is perfectly square, 100% is very short pulsewave) and is modulated by LFO 2.
LFO 2 direct modulation amount for pulse width of square oscillator is 170.
Oscillator 2 timbre
Volume level for oscillator 2 is manually set to 75.
Tone for oscillator 2 is off.
Volume (VCA) volume
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 20.
Noise timbre
Noise level is set to 57 and is modulated by Mod Wheel.
Mod Wheel mod-matrix 2 modulation amount for Noise level is -16.
OSC 1→2 sync timbre
to be completed
Oscillator 2 is syncronized to oscillator 1. This generates rich harmonic content when changing oscillator's relative piches.
High-pass filter (HPF) timbre
High-pass filter cut-off frequency is set to 20Hz (0) and is modulated by Mod Env.
Mod Env mod-matrix 1 modulation amount for high-pass filter cut-off frequency is 63.
Low-pass filter (VCF) timbre
Low-pass filter cut-off frequency is set to 50Hz (0) and is modulated by Note Vel, VCF Env.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 217.
Low-pass filter envelope amount is modulated by Note Vel.
Note Vel direct modulation amount for low-pass filter envelope amount is 128.
Filter resonance is statically set to 22% (56).
Oscillator drift & unison detuning timbre
Unison detune level is manually set to ±16 cents (81).
Oscillators drift level is manually set to 15. Drift rate is 0
Oscillator 1 pitch pitch
Oscillator 1 pitch is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 1 pitch is 2.
Oscillator 2 pitch pitch
Oscillator 2 pitch is set to -2 semitones and is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 2 pitch is 120.
FX routing & levels fx
FX mode is set to Send, and routing is
Effect 1 level is off. Effect 2 level is manually set to 21. Effect 3 level is manually set to 37. Effect 4 level is manually set to 21.
TC Deep Reverb fx
not yet complete
Noise Gate fx
not yet complete
Multi-Band Distortion fx
not yet complete
Mod Wheel modulator
Controls OSC 1 Mod Wheel > Pitch Mod Depth, Noise Level.
| function | type | destination | amount |
|---|---|---|---|
| pitch | menu | OSC 1 Mod Wheel > Pitch Mod Depth | 6 |
| timbre | matrix | Noise Level | -16 |
Pressure modulator
Controls OSC 1 Aftertouch > Pitch Mod Depth.
| function | type | destination | amount |
|---|---|---|---|
| pitch | menu | OSC 1 Aftertouch > Pitch Mod Depth | 13 |
Note Vel modulator
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader-indirect | VCF Cut-off Frequency | 217 |
| menu | VCF Envelope Velocity Sensitivity | 128 | |
| menu | VCA Envelope Velocity Sensitivity | 95 |
LFO 1 modulator
Controls OSC 1 Pitch, OSC 2 Pitch.
| function | type | destination | amount |
|---|---|---|---|
| pitch | fader | OSC 1 Pitch | 2 |
| pitch | fader | OSC 2 Pitch | 120 |
| name | value |
|---|---|
| LFO 1 Rate | 2.42Hz (141) |
| LFO 1 Delay / Fade | 2.53s (98) |
| LFO 1 Shape | Sine |
| LFO 1 Key Sync | off |
| LFO 1 Arp Sync | off |
| LFO 1 Mono Mode | 0 |
| LFO 1 Slew Rate | 0 |
LFO 2 modulator
Controls OSC 1 Pulse Width Modulation Depth.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | OSC 1 Pulse Width Modulation Depth | 170 |
| name | value |
|---|---|
| LFO 2 Rate | 0.6Hz (93) |
| LFO 2 Delay / Fade | 0s (0) |
| LFO 2 Shape | Triangle |
| LFO 2 Key Sync | off |
| LFO 2 Arp Sync | off |
| LFO 2 Mono Mode | 0 |
| LFO 2 Slew Rate | 0 |
VCA Env modulator
Controls VCA Gain for All Voices.
| function | type | destination | amount |
|---|---|---|---|
| volume | menu | VCA Gain for All Voices | 255 |
| name | value |
|---|---|
| VCA Envelope Attack Time | 0.26s (44) |
| VCA Envelope Decay Time | 1.13s (128) |
| VCA Envelope Sustain Level | 100% (255) |
| VCA Envelope Release Time | 2.82s (173) |
| VCA Envelope Trigger Mode | Key (0) |
| VCA Envelope Attack Curve | 128 |
| VCA Envelope Decay Curve | 0 |
| VCA Envelope Sustain Curve | 128 |
| VCA Envelope Attack Curve | 0 |
VCF Env modulator
Controls VCF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | fader | VCF Cut-off Frequency | 217 |
| name | value |
|---|---|
| VCF Envelope Attack Time | 0.87s (110) |
| VCF Envelope Decay Time | 21.32s (225) |
| VCF Envelope Sustain Level | 52% (133) |
| VCF Envelope Release Time | 7.09s (185) |
| VCF Envelope Trigger Mode | Key (0) |
| VCF Envelope Attack Curve | 47 |
| VCF Envelope Decay Curve | 0 |
| VCF Envelope Sustain Curve | 128 |
| VCF Envelope Attack Curve | 0 |
Mod Env modulator
Controls HPF Cut-off Frequency.
| function | type | destination | amount |
|---|---|---|---|
| timbre | matrix | HPF Cut-off Frequency | 63 |
| name | value |
|---|---|
| Mod Envelope Attack Time | 6.02s (182) |
| Mod Envelope Decay Time | 20.26s (222) |
| Mod Envelope Sustain Level | 50% (128) |
| Mod Envelope Release Time | 0.37s (63) |
| Mod Envelope Trigger Mode | Key (0) |
| Mod Envelope Attack Curve | 128 |
| Mod Envelope Decay Curve | 120 |
| Mod Envelope Sustain Curve | 128 |
| Mod Envelope Attack Curve | 0 |